Polycom SOUNDPOINT 3804-11530-222 - Manual (Page 56)

Release Notes - SIP Application Changes
Page 50 Copyright © 2007 Polycom, Inc.
2.20.4 Configuration File Parameter Changes
.cfg File Action Parameter Description
000000000000 added CONTACTS_DIRECTORY,
OVERRIDES_DIRECTORY
New fields which can specify a directory on
the boot server in which contact overrides
(<Ethernet address>-directory.xml) and
configuration overrides (<Ethernet
address>-phone.cfg) should be stored.
sip added voIpProt.SIP.dialog.useSDP 0 or Null: New dialog event package draft is
used (no SDP in dialog body).
1: For backwards compatibility, use this
setting to send SDP in dialog body.
sip changed feature.9.enabled The “url-dialing” feature must be disabled by
setting feature.9.enabled=”0” in order to
prevent unknown callers from being
identified on the display by an IP address.
2.21 Version 1.6.2
2.21.1 Added or Changed Features
None.
2.21.2 Removed Features
None.
2.21.3 Corrections
The following issues have been resolved with this release:
• 9580:
Changes in <Ethernet address>.cfg will not be detected during
configuration polling
• 11190:
Incorrect time zone is used for one to two minutes after a reboot
• 12552:
Phone reboots if line keys on Expansion Module are pressed rapidly
and continuously
• 12841: Far end phone continues to ring if near end phone ends call prior to far
end answering in specific shared-line scenario
• 12951: Malformed RTP packets received by phone can cause it to crash
2.21.4 Configuration File Parameter Changes
None.
2.22 Version 1.6.1
2.22.1 Added or Changed Features
• 12296:
Pressing and holding unassigned line key adds a directory contact
• 12366:
Application log is uploaded shortly after reboot