Polycom 6000 - Manual (Page 12)

User Guide for Polycom QDX 6000 Room System
6 © Polycom, Inc.
Controlling What You See
Selecting and Adjusting a Camera or Other Video Source
You can use the remote control to select the main camera or any other near-site
or far-site video sources, such as document cameras, computers, VCRs, or
DVD players. You are able to adjust the main camera or far-site camera that
supports pan, tilt, and zoom movement.
To select a near-site or far-site camera, or other video source:
1. If you are in a call, press Near or Far on the remote control to
select either near-site or far-site control.
2. Press Camera on the remote control. Then select the camera or other
video source you want to use.
To adjust a camera using the remote control:
1. Press Near or Far to select either near-site or far-site control.
2. Press the arrow buttons on the remote control to move the camera up,
down, left, or right.
3. Press Zoom on the remote control to zoom out or in.
You can adjust the far-site camera only if it is configured to allow you to control it.
This onscreen icon indicates that you can control a
near-site camera or video source.
This onscreen icon indicates that you can control a
far-site camera or video source.