Polycom 6000 - Manual (Page 16)

User Guide for Polycom QDX 6000 Room System
10 © Polycom, Inc.
To show the PIP during a call:
 Repeatedly press PIP on the remote control to scroll through the
available screen layouts. The PIP can change to show the near or far site.
Controlling What You Hear
Adjusting Volume
Use the remote control to raise or lower the volume of the sound you hear.
To adjust the volume:
 Press Volume on the remote control.
Changing the volume affects only the sound you hear at your site.
Muting the Microphone
You can mute the microphone if you do not want the far site to hear you.
To mute or unmute the microphone:
 Press Mute on the remote control.
If a Polycom microphone is connected to your system, you can also mute the
call by pressing mute button on the microphone.
Select this setting... To set the PIP to …
On Stay on for the duration of the call.
Auto Be shown when the user operates the
remote control and be turned off when the
user puts the remote control on the table
Off Be turned off during the call.