Quantum TC2201 - Manual (Page 132)

Perform Configuration
Quantum TC2201 User’s Guide 112
Real-Time Clock
Configuration
3
When this option is selected from the Perform Configuration menu, the
System Clock Setup Menu appears.
Table 46 System
Clock Setup Menu
Select 1 to set the clock. A series of three prompts will appear allowing set
up of 24 hour time (hh:mm:ss) and current date (mm/dd/yyyy). For
time, it is not necessary to enter the seconds, i.e. hh:mm is an acceptable
format. For the date, the month and day can be entered as single digits,
for instance “6” instead of “06”.
Save
Configuration
3
This option saves the current configuration state in FLASH, which
updates the saved previous configuration state. Saved changes are
retained across future device resets or power cycles.
Restore Last
Saved
Configuration
3
This option restores the most recently saved configuration. This can be
useful when configuration changes are made, but the user wishes to
return to the previously saved configured state. The changes take effect
after the TC2201 has rebooted.
System Clock Setup Menu
X.XX.XXXX XXXXXX XXXXXXXXXXXXXX
07/26/2005 12:48:42
Date: MONDAY, 07/26/2005, Time: 12:48:42
1) Set clock
X) Return to previous menu