Quantum TC2201 - Manual (Page 95)

Perform Configuration
Quantum TC2201 User’s Guide 75
User Settings
Configuration
3
This menu changes security settings, including the user name and
password. User names and passwords should be unique and kept
confidential and it is recommended to use a combination of letters and
numbers when creating user names and passwords. The default values
are “root” for user name and “password” for password.
Table 10 User
Settings Configuration
Menu
Baud Rate
Configuration
3
This menu changes the baud rate used on the serial port. Select 1 through
5 for the appropriate baud rate setting. The default setting for the baud
rate is 115200.
User Settings
X.XX.XXXX XXXXXX XXXXXXXXXXXXXX
07/26/2005 08:56:22
Current Username : root
1) Change Username
2) Change Password
X) Return to previous menu
Note:
In the event that either or both the user name and password
are forgotten, it is possible to reset the user name and
password to their default values by resetting the TC2201 to
factory defaults. Note that resetting to factory defaults from
the serial port will also reset all other configuration settings to
factory defaults, as well as erase all current maps. It is
recommended to capture a copy of the system report
(available from the System Utilities Menu) in order to make
reconfiguration easier. If a backup configuration file was
previously saved (as described in Chapter 8), this file can also
make the reconfiguration process much easier.