Using the command line interface, Appendix c, Appendix c, using the command line interface – Quantum TC2201 User Manual
Page 91
Advertising
Quantum TC2201 User’s Guide
71
Appendix C
C
Using the Command Line
Interface
This chapter describes specific configuration options available from the
Command Line Interface (CLI).
The TC2201 allows the user to access many configuration settings
through the CLI. Among these settings are:
• Baud rate of the serial port
• Ethernet IP and MAC addresses
• Device Mapping
• Trace level settings
All of the above settings may be changed and saved.
Note:
Unless otherwise indicated, configuration changes take effect
when the unit next powers on or reboots.
Advertising