Quantum TC2201 - Manual (Page 137)

System Utilities
Quantum TC2201 User’s Guide 117
Table 52 Event Log
Menu
• Select 1 to display the event log.
Example of an event log entry:
Num Date Time sysUpTime Message
45 07/26/2005 11:21:30 0d07h37m42.18s Starting Quantum
iSNS Client, v1.0.
• Select 2 to clear the event log of all old entries and start over with an
empty list.
View Report 3 When this option is selected from the System Utilities menu, the View
Report Menu is displayed.
When selected, the following prompt appears:
Pause after each Report Section?
(Press 'n' for no pause, any other key to pause)
The report includes detailed information about the hardware platform,
bootup initialization, serial port settings, iSCSI settings, iSNS Settings,
real-time clock settings, Ethernet settings, SCSI bus settings, discovery
information, mapped hosts, active maps, SCSI statistics, trace settings,
current traces, previous traces, assert traces, event log settings, event log,
and a list of enabled features.
Event Log Menu
X.XX.XXXX XXXXXX XXXXXXXXXXXXXX
07/26/2005 08:56:22
1) Display event log
2) Clear event log
X) Return to previous menu
Note: Event logging captures over 2000 events and then starts
overwriting the log when full.