Factory settings reset – Quantum TC2201 User Manual
Page 41
Chapter 2 TC2201 Web Interface
System Page
Quantum TC2201 User’s Guide
21
To make any changes, modify the entries as described below and then
select the
Submit
button.
•
Date Settings
are for setting the date, month, and year. Use a four
digit number to represent the year.
•
Time Settings
are for setting the hours, minutes, and seconds. This is a
24 hour clock.
Factory Settings Reset
2
This page allows the TC2201 to be reset to the factory default settings. The
TC2201 must be rebooted before the reset settings will take effect.
Note:
Be sure to correctly set the time and date in the
Real Time Clock
configuration menu so that event logging is accurate.
Note:
Resetting to factory defaults from the QVM interface will not
affect ethernet connectivity. User configured values for the IP
address, gateway, and subnet mask are retained after the
TC2201 resets. Note that user names and passwords are NOT
retained.
Note:
Settings are not reset to factory defaults until the TC2201 is
rebooted.