Quantum TC2201 - Manual (Page 50)

Chapter 2 TC2201 Web Interface
SCSI Bus Page
Quantum TC2201 User’s Guide 30
Figure 22 SCSI target Overrides
Settings Page
To finalize any changes for the override settings, select the
Submit
button.
•
Wide Negotiation
enables/disables the option for negotiation on a
wide SCSI bus. The default setting is Enabled.
•
Sync Negotiation
enables/disables the option for synchronous
negotiation on the SCSI bus. The default setting is Enabled.
•
Alternate Block Size
enables/disables block sizes of 520 bytes each,
which is the common block size used in AS/400 environments. The
default setting is disabled.
•
Ultra SCSI 3 Negotiation
enables/disables Ultra SCSI 3 support for the
selected Target ID. This feature is useful for solving certain
compatibility issues in mixed vendor environments, where, for
example, there may be a device that cannot handle automatic
negotiation of the bus speed, or possibly where there is a device that
does negotiate to use Ultra SCSI-3 but somehow cannot actually
handle the speed. The default setting is Enabled.
Buffered Tape Writes 2 This
Buffered Tape Writes
page allows for making configuration changes
for buffered tape writes.
To access the
Buffered Tape Writes
page:
Note: Override settings should not be changed except by or under
the direction of an authorized Quantum technician .