LumaSense Technologies INNOVA 1316A-2 User Manual
Page 40
Chapter 3
_________________________________________________________________________________________
_____________________________________________________________________________
BE6021-11
1316A-2 Multi Gas Monitor
LumaSense Technologies A/S
Instruction Manual
Page 40 of 97
Start Soft Key
On pressing the Start Soft Key data is collected by the BZ6013
Application Software to be displayed on the screen.
Start can also be activated by pulling down the Bench Command
menu and select Data/Status
The following window will appear:
Figure 3.6. The Data Status window.
It is from this window (see figure 3.6) possible to select to have the
data transmitted as One Packet for a number of measurement
results or to have the data transmitted continuously.