HP EVA P6000 Storage - Manual (Page 191)

Table 27 Error Messages (continued)
How to correct Meaning Status code value
Code load the EVA firmware with a
supported method. An unsupported code load attempt was
made. 146
Specified Option Iis Not Yet
Implemented
Disable active-active or read-only and
retry operation. Data replication group is already
present_only. 147
DRM Group Is Already “Present
Only”
Report the error to product support. This error is no longer supported. 148
The Presented Unit Identifier Is
Invalid
Report the error to product support. This is an internal error. 149
Internal SCS Error
Report the error to product support. This is an internal error. 150
Invalid SCS Function Code
Report the error to product support. The command is not supported. 151
Unsupported SCS Function Code
Replace the failed drive and retry the
command. The requested command cannot be
completed because a physical drive is failed. 152
Init PS Failed
Verify that the parameters of the
command are correct and retry. The object identifier included with the
command is invalid. This can indicate a user
or program error. 153
Target Bad Identifier
Report the error to product support. This error is no longer supported. 154
Physcial Store Is Volume
Verify that the parameters of the
command are correct and retry. The requested "usage" of the volume is not
a valid value. This can indicate a user or
program error. 155
Bad Volume Usage
Verify that the parameters of the
command are correct and retry. The requested "usage" of the volume is not
a consistent with the disk group indicated.
This can indicate a user or program error. 156
Bad LDAD Usage
Verify that the parameters of the
command are correct and retry. The disk group requested for the attempted
command is not valid. 157
No LDAD Handle
Report the error to product support. This error is no longer supported. 158
Bad Quorum Flag
Verify that the parameters of the
command are correct and retry. The command parameters do not correlate
to an object in the system. This can indicate
a user or program error. 159
Internal Tag Invalid
Verify that the parameters of the
command are correct and retry. The command parameters do not correlate
to an object in the system. This can indicate
a user or program error. 160
Internal Tag Bad UUID
Ensure that a supported number of
drives are used to initialize the storage When attempting to initialize the storage
cell, either the command is attempted with 161
Too Many Physical Store Tags
cell, and that the drives are each
included only once. too many drives, or the drive list has
duplicate entries.
Report the error to product support. This error indicates that a product support
command is invalid or no longer supported. 162
Bad Routine
Verify that the parameters of the
command are correct and retry. The identifier supplied with the command
does not correspond to an object in the
system. 163
No Tag For Identifier
Report the error to product support. This error only applies to product support
commands. 164
Bad Loop Number
191