HP EVA P6000 Storage - Manual (Page 264)

because the targets are auto detected and the show targets displayed information can be a helpful
debug aid.
Admin session Authority
add
rm target Syntax
Removes a target from the module’s target database. rm Keywords
Example:
MEZ75 (admin) #> target rm
Warning: This command will cause the removal of all mappings and maskings
associated with the target that is selected.
Index State (WWNN,WWPN/iSCSI Name)
----- ----- ----------------------
0 Online 50:01:43:80:04:c6:89:60,50:01:43:80:04:c6:89:68
1 Online 50:01:43:80:04:c6:89:60,50:01:43:80:04:c6:89:6c
Please select an 'OFFLINE' Target from the list above ('q' to quit):
Traceroute
Prints the route a network packet takes to reach the destination specified by the user.
Admin session Authority
traceroute Syntax
Example:
MEZ75 (admin) #> traceroute
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
IP Address (IPv4 or IPv6) [0.0.0.0] 10.6.6.131
Outbound Port (0=Mgmt, 1=GE1, 2=GE2, ...) [Mgmt ] 0
Tracing route to 10.6.6.131 over a maximum of 30 hops:
1 10.6.6.131 0.1ms 0.1ms 0.1ms
Traceroute completed in 1 hops.
264 Command reference