Labconco SteamScrubbe & FlaskScrubbe Glassware Washers 44204 Series - Manual (Page 22)

Labconco Glassware Washer Service/Technical Manual
16
Installing Optional Pipet Inserts
Two sizes of Pipet Inserts are available. The 8-place Pipet Insert
accommodates 1 mL to 10 mL pipets. Multiple Pipet Inserts may be installed,
if desired.
To install an 8-place Pipet Insert (Below Left):
1. Insert the tool supplied with the Spindle Rack or a screwdriver into
the top of a spindle and turn counterclockwise to remove the spindle.
2. In the position previously occupied by the spindle, thread into place
the short spindle you received with the Pipet Insert.
3. Push the Pipet Insert over the short spindle.
4. If spindles other than the one used for the short spindle are removed,
the holes must be plugged with plastic plugs supplied with spindle
rack.
The 16-place Pipet Insert accommodates 1 ml to 50 ml pipets. Two of these
inserts may be installed if desired.