Delfield T5 - Manual (Page 23)

23
6.5 DISPLAyING THE THREE LATEST
HACCP ALARMS (PUSH-BUTTON 10)
Set the machine to ON
4.1 PUSH-BUTTONS :
1. ON /OFF (STAND BY)
2. SOFT BLAST CHILLING CYCLE (+38°F / +3°C)
3. HARD BLAST CHILLING CYCLE (+38°F / +3°C)
4. BLAST FREEZING CYCLE (0°F / -18°C)
5. END CYCLE BY TIME / PROBE (TEMPERATURE)
5A. PROBE CHILLING INDICATOR LED
5B. TIMED CHILLING INDICATOR LED
6. CYCLE START / STOP
7. INCREASE VALUE
8. DECREASE VALUE
9. RECIPE PROGRAMS (CHILLING CYCLES)
10. HACCP AND PRINTER (OPTIONAL)
11. DEFROSTING / FORCED VENTILATION
12. CHILLING / FREEZING CYCLE INDICATOR LED
13. STORAGE INDICATOR LED
14. TIME DISPLAY
15. TEMPERATURE DISPLAY
°C
HACCP
PROGRAM
0 °
+38 °
HARD
+38 °
.
Press and hold down push-button 10
4.1 PUSH-BUTTONS :
1. ON /OFF (STAND BY)
2. SOFT BLAST CHILLING CYCLE (+38°F / +3°C)
3. HARD BLAST CHILLING CYCLE (+38°F / +3°C)
4. BLAST FREEZING CYCLE (0°F / -18°C)
5. END CYCLE BY TIME / PROBE (TEMPERATURE)
5A. PROBE CHILLING INDICATOR LED
5B. TIMED CHILLING INDICATOR LED
6. CYCLE START / STOP
7. INCREASE VALUE
8. DECREASE VALUE
9. RECIPE PROGRAMS (CHILLING CYCLES)
10. HACCP AND PRINTER (OPTIONAL)
11. DEFROSTING / FORCED VENTILATION
12. CHILLING / FREEZING CYCLE INDICATOR LED
13. STORAGE INDICATOR LED
14. TIME DISPLAY
15. TEMPERATURE DISPLAY
°C
HACCP
PROGRAM
0 °
+38 °
HARD
+38 °
for more
than five seconds (relative LED illuminates) to enter
the alarm display function (date, hour and minute,
alarm type and maximum temperature detected).
Every time the HACCP push-button is pressed, the
stored data are displayed.
EXAMPLE:
ALL.11 Display 15 Display 16
--- Str (start)
12 hr hour
29 min minutes
6 day days
8 mon month
03 yr year
End end
13 Hr
21 min
6 day
8 mon
03 yr
75 maximum temperature
detected inside the cell
6.6 PRINTING OUT STORED DATA
PUSH-BUTTON (10)
With the appliance in STAND-BY status, press and
hold down push-button 10
4.1 PUSH-BUTTONS :
1. ON /OFF (STAND BY)
2. SOFT BLAST CHILLING CYCLE (+38°F / +3°C)
3. HARD BLAST CHILLING CYCLE (+38°F / +3°C)
4. BLAST FREEZING CYCLE (0°F / -18°C)
5. END CYCLE BY TIME / PROBE (TEMPERATURE)
5A. PROBE CHILLING INDICATOR LED
5B. TIMED CHILLING INDICATOR LED
6. CYCLE START / STOP
7. INCREASE VALUE
8. DECREASE VALUE
9. RECIPE PROGRAMS (CHILLING CYCLES)
10. HACCP AND PRINTER (OPTIONAL)
11. DEFROSTING / FORCED VENTILATION
12. CHILLING / FREEZING CYCLE INDICATOR LED
13. STORAGE INDICATOR LED
14. TIME DISPLAY
15. TEMPERATURE DISPLAY
°C
HACCP
PROGRAM
0 °
+38 °
HARD
+38 °
for more than five
seconds to print out the latest work cycle.
(With the appliance in STAND-BY status, press push-
button 10
4.1 PUSH-BUTTONS :
1. ON /OFF (STAND BY)
2. SOFT BLAST CHILLING CYCLE (+38°F / +3°C)
3. HARD BLAST CHILLING CYCLE (+38°F / +3°C)
4. BLAST FREEZING CYCLE (0°F / -18°C)
5. END CYCLE BY TIME / PROBE (TEMPERATURE)
5A. PROBE CHILLING INDICATOR LED
5B. TIMED CHILLING INDICATOR LED
6. CYCLE START / STOP
7. INCREASE VALUE
8. DECREASE VALUE
9. RECIPE PROGRAMS (CHILLING CYCLES)
10. HACCP AND PRINTER (OPTIONAL)
11. DEFROSTING / FORCED VENTILATION
12. CHILLING / FREEZING CYCLE INDICATOR LED
13. STORAGE INDICATOR LED
14. TIME DISPLAY
15. TEMPERATURE DISPLAY
°C
HACCP
PROGRAM
0 °
+38 °
HARD
+38 °
once to print out HACCP data). When
the appliance is operating and the printer is on, the
current cycle will be printed out.
6.7 FORCED VENTILATION FUNCTION
To activate this function when the appliance is
ON
4.1 PUSH-BUTTONS :
1. ON /OFF (STAND BY)
2. SOFT BLAST CHILLING CYCLE (+38°F / +3°C)
3. HARD BLAST CHILLING CYCLE (+38°F / +3°C)
4. BLAST FREEZING CYCLE (0°F / -18°C)
5. END CYCLE BY TIME / PROBE (TEMPERATURE)
5A. PROBE CHILLING INDICATOR LED
5B. TIMED CHILLING INDICATOR LED
6. CYCLE START / STOP
7. INCREASE VALUE
8. DECREASE VALUE
9. RECIPE PROGRAMS (CHILLING CYCLES)
10. HACCP AND PRINTER (OPTIONAL)
11. DEFROSTING / FORCED VENTILATION
12. CHILLING / FREEZING CYCLE INDICATOR LED
13. STORAGE INDICATOR LED
14. TIME DISPLAY
15. TEMPERATURE DISPLAY
°C
HACCP
PROGRAM
0 °
+38 °
HARD
+38 °
, press push-button 12
4.1 PUSH-BUTTONS :
1. ON /OFF (STAND BY)
2. SOFT BLAST CHILLING CYCLE (+38°F / +3°C)
3. HARD BLAST CHILLING CYCLE (+38°F / +3°C)
4. BLAST FREEZING CYCLE (0°F / -18°C)
5. END CYCLE BY TIME / PROBE (TEMPERATURE)
5A. PROBE CHILLING INDICATOR LED
5B. TIMED CHILLING INDICATOR LED
6. CYCLE START / STOP
7. INCREASE VALUE
8. DECREASE VALUE
9. RECIPE PROGRAMS (CHILLING CYCLES)
10. HACCP AND PRINTER (OPTIONAL)
11. DEFROSTING / FORCED VENTILATION
12. CHILLING / FREEZING CYCLE INDICATOR LED
13. STORAGE INDICATOR LED
14. TIME DISPLAY
15. TEMPERATURE DISPLAY
°C
HACCP
PROGRAM
0 °
+38 °
HARD
+38 °
for more than five
seconds. The fan will continue to operate even when
the cell door is open.
During forced ventilation, display 16
4.1 PUSH-BUTTONS :
1. ON /OFF (STAND BY)
2. SOFT BLAST CHILLING CYCLE (+38°F / +3°C)
3. HARD BLAST CHILLING CYCLE (+38°F / +3°C)
4. BLAST FREEZING CYCLE (0°F / -18°C)
5. END CYCLE BY TIME / PROBE (TEMPERATURE)
5A. PROBE CHILLING INDICATOR LED
5B. TIMED CHILLING INDICATOR LED
6. CYCLE START / STOP
7. INCREASE VALUE
8. DECREASE VALUE
9. RECIPE PROGRAMS (CHILLING CYCLES)
10. HACCP AND PRINTER (OPTIONAL)
11. DEFROSTING / FORCED VENTILATION
12. CHILLING / FREEZING CYCLE INDICATOR LED
13. STORAGE INDICATOR LED
14. TIME DISPLAY
15. TEMPERATURE DISPLAY
°C
HACCP
PROGRAM
0 °
+38 °
HARD
+38 °
will
show“dEF”.
6.8 MANUAL DEFROSTING
To activate this function when the appliance is
ON
4.1 PUSH-BUTTONS :
1. ON /OFF (STAND BY)
2. SOFT BLAST CHILLING CYCLE (+38°F / +3°C)
3. HARD BLAST CHILLING CYCLE (+38°F / +3°C)
4. BLAST FREEZING CYCLE (0°F / -18°C)
5. END CYCLE BY TIME / PROBE (TEMPERATURE)
5A. PROBE CHILLING INDICATOR LED
5B. TIMED CHILLING INDICATOR LED
6. CYCLE START / STOP
7. INCREASE VALUE
8. DECREASE VALUE
9. RECIPE PROGRAMS (CHILLING CYCLES)
10. HACCP AND PRINTER (OPTIONAL)
11. DEFROSTING / FORCED VENTILATION
12. CHILLING / FREEZING CYCLE INDICATOR LED
13. STORAGE INDICATOR LED
14. TIME DISPLAY
15. TEMPERATURE DISPLAY
°C
HACCP
PROGRAM
0 °
+38 °
HARD
+38 °
press push-button 12
4.1 PUSH-BUTTONS :
1. ON /OFF (STAND BY)
2. SOFT BLAST CHILLING CYCLE (+38°F / +3°C)
3. HARD BLAST CHILLING CYCLE (+38°F / +3°C)
4. BLAST FREEZING CYCLE (0°F / -18°C)
5. END CYCLE BY TIME / PROBE (TEMPERATURE)
5A. PROBE CHILLING INDICATOR LED
5B. TIMED CHILLING INDICATOR LED
6. CYCLE START / STOP
7. INCREASE VALUE
8. DECREASE VALUE
9. RECIPE PROGRAMS (CHILLING CYCLES)
10. HACCP AND PRINTER (OPTIONAL)
11. DEFROSTING / FORCED VENTILATION
12. CHILLING / FREEZING CYCLE INDICATOR LED
13. STORAGE INDICATOR LED
14. TIME DISPLAY
15. TEMPERATURE DISPLAY
°C
HACCP
PROGRAM
0 °
+38 °
HARD
+38 °
(relative LED
illuminates).
If conditions allow it (the temperature detected by
the evaporator probe must be lower than the set
point in the program parameters), the appliance
will perform a defrost cycle. Display 16
4.1 PUSH-BUTTONS :
1. ON /OFF (STAND BY)
2. SOFT BLAST CHILLING CYCLE (+38°F / +3°C)
3. HARD BLAST CHILLING CYCLE (+38°F / +3°C)
4. BLAST FREEZING CYCLE (0°F / -18°C)
5. END CYCLE BY TIME / PROBE (TEMPERATURE)
5A. PROBE CHILLING INDICATOR LED
5B. TIMED CHILLING INDICATOR LED
6. CYCLE START / STOP
7. INCREASE VALUE
8. DECREASE VALUE
9. RECIPE PROGRAMS (CHILLING CYCLES)
10. HACCP AND PRINTER (OPTIONAL)
11. DEFROSTING / FORCED VENTILATION
12. CHILLING / FREEZING CYCLE INDICATOR LED
13. STORAGE INDICATOR LED
14. TIME DISPLAY
15. TEMPERATURE DISPLAY
°C
HACCP
PROGRAM
0 °
+38 °
HARD
+38 °
will show
“dEF”.
To immediately stop a defrost cycle, press push-
button 12
4.1 PUSH-BUTTONS :
1. ON /OFF (STAND BY)
2. SOFT BLAST CHILLING CYCLE (+38°F / +3°C)
3. HARD BLAST CHILLING CYCLE (+38°F / +3°C)
4. BLAST FREEZING CYCLE (0°F / -18°C)
5. END CYCLE BY TIME / PROBE (TEMPERATURE)
5A. PROBE CHILLING INDICATOR LED
5B. TIMED CHILLING INDICATOR LED
6. CYCLE START / STOP
7. INCREASE VALUE
8. DECREASE VALUE
9. RECIPE PROGRAMS (CHILLING CYCLES)
10. HACCP AND PRINTER (OPTIONAL)
11. DEFROSTING / FORCED VENTILATION
12. CHILLING / FREEZING CYCLE INDICATOR LED
13. STORAGE INDICATOR LED
14. TIME DISPLAY
15. TEMPERATURE DISPLAY
°C
HACCP
PROGRAM
0 °
+38 °
HARD
+38 °
.
6.9 AUTOMATIC DEFROST CyCLES
The appliance automatically performs defrost cycles
during storage. Three defrost cycles are performed
during a 24-hour period(once every 8 hours).
The appliance automatically restarts once the
defrost cycle has been completed.
6.10 PRINTER OPERATION
If you have to turn the instrument ON/OFF press
ON/OFF
If you have to feed the paper by hand press feed
If you have to change the roll of paper, turn the
instruments off, press the push bottom for opening
the panel at the front of the instrument.
Slip the roll of paper into the lower side of the roller
press feed as long as the roller drags the roll of
paper.
Put the roll of paper into it’s box
Close the panel at the front of instruments.