Delfield T5 - Manual (Page 6)

6
1.1. General information
• This manual is an integral part of the product,
providing all the information required to ensure
correct installation, operation and maintenance
of the machine.
• Read the manual carefully, making reference
to it for machine operation. Keep the manual
in a safe place where it can be accessed by all
authorised operators (installers, operators and
service personnel).
• The machine has been designed for professional
applications only and should only be operated
by qualified personnel.
• The machine must only be used for the purposes
for which it was designed, i.e. for chilling and
freezing food products.
The machine must not be used for products
requiring constant temperature control and
recording, such as:
- heat-sensitive chemicals,
- medicines or
- blood products.
• The manufacturer declines all responsibility
for any damage caused by incorrect or
unreasonable machine use, such as:
• improper use by untrained persons;
• technical modifications or operations not suited
to specific models;
• use of non-original or non-specific spare parts;
• failure to follow the instructions given in this
manual.
1.2 Installation
In the event that the machine is fitted with
a remote condenser unit, the installation
technician is responsible for checking all
connections in compliance with the instructions
given by Delfield for plant and machine
installation.
1.3 Transport and handling
• To load or unload the machine and/or
components from/onto the means of transport,
use a lift truck or fork lift equipped with forks
that are at least half the length of the machine
housing; use a crane if the machine is fitted with
eye bolts. Select the lifting equipment suited
to the weight and overall dimensions of the
packaged machine/components.
• When handling the machine/ components,
apply all precautions to prevent damage, in
compliance with the information given on the
packaging material
1.4 Unpacking
• Remove all cardboard, wood or other materials
from the wood base on which the machine is
set. Lift the machine/components with suitable
means (e.g. lift truck), remove the wood base,
then position the machine/components in the
allocated site.
• Once all packing material has been removed,
check that the machine has
not been damaged in any
way.
• Remove the protective
PVC film on the stainless
steel panels from all
internal and external
surfaces (fig. 2).
• Always wear protective
gloves when handling packing material and the
wood base.
• NB Dispose of packing materials in compliance
with disposal regulations applied in the country
where the machine is to be installed. Never
dispose of materials in the environment.
1.5 General safety regulations
Failure to observe the recommendations made
by the present manual will be at the entire
responsibility of the machine user. The main
safety regulations are as follows:
- do not touch the machine with moist or wet
hands or feet;
- never operate the machine while barefoot;
- do not insert screwdrivers, cooking utensils
or any other object between the guards and
moving parts;
- before performing cleaning or routine
maintenance operations, disconnect the
machine from the power supply at the
master switch and the main knife switch (if
present);
- never pull on the power cable to disconnect
the machine from the power supply.
1. GENERAL DOCUMENTATION