LEICA 10x42 Geovid R Binocular/Rangefinder (Yards) - Manual (Page 38)

36
BASIC INFOMATION ABOUT THE MENU SYSTEM
For all settings:
– The main menu contains four options: Display in
yards/meters ( US.EU ), ballistics curve ( baLL ),
zeroing distance (
SId
) and ballistic output format
(
AbC
). Details of these functions can be found in
the relevant sections.
– Both the main menu and the relevant setting
options scroll in a continuous loop, i.e. all options/
settings can be accessed by repeatedly pressing
the relevant button.
SETTING THE UNIT OF MEASURE
The Leica Geovid HD-B can be set to either the
imperial unit system commonly used in the USA ( US )
or the metric system (
EU
) i.e. yards and inches /
Fahrenheit / inHG (inches of mercury) or meters and
centimeters / Celsius / millibars for distance,
temperature and air pressure respectively.
This setting also determines the units used for the
point of aim, the ballistics curves and the zeroing
distances. The factory setting on the Leica Geovid
HD-B is yards.
Setting
1. Press and hold (≥3s) the secondary / menu button
(2).
•
US.EU
appears in the display (flashing).
2. Press the main / release button (7) to select the
unit of measure you want to use.
US
= Display in yards
EU
= Display in meters
US EU
Note:
The current setting can always be seen in the display:
If metric values are selected, a dot appears to the
bottom right of the reticule.
3. Save your setting by pressing the secondary /
menu button.
• The saved setting lights up as confirmation and the
display then switches to the next option (
bALL
=
Ballistics curve) and then goes out if no more
settings are made.