LEICA 10x42 Geovid R Binocular/Rangefinder (Yards) - Manual (Page 47)

45
pOINT OF IMpACT CORRECTION USING
ELEVATION ADJUSTMENT (CLICK / MOA
ADJUSTMENT)
Variations in the point of impact can be compensated
by a corresponding adjustment of the reticule on your
telescopic sight.
Taking into account the measured range, the
trajectory of the bullet and the set zeroing distance
(see p. 42), the Leica Geovid HD-B can display the
required adjustments, i.e. the relevant number of
clicks.
For the different elevations, you can specify whether
the clicks are to be specified
– based on the international standard MOA (minutes
of angle) graduation, or
– in 5 or 10 centimeter graduations.
SETTINGS AND SELECTION OF BALLISTIC
OUTpUT FORMATS
Start with step 1 if you have not yet opened the menu
system and with step 3 if you have already set the unit
of measure and
ABC is still flashing in the display.
1. Press and hold (≥2s) the secondary / menu button
(8).
•
US.EU
appears.
2. Briefly (<2s) press the secondary / menu button
three times.
• The display changes to bALL and SId and then to
ABC
.
3. Select the relevant ballistic setting by repeatedly
pressing the main / release button (7).
–
EHr
or
–
HOLd
or
– 1-1 (1MOA), or
–
1-3
(1/3MOA), or
–
1-4
(¼MOA), or
– 10
– 5
4. Save your setting by pressing the secondary /
menu button.
• The saved setting is displayed continuously for
4s as confirmation and the display then goes out.