Marantz CINEMA 50 9.4-Channel Network A/V Receiver (Black) - Manual (Page 184)

Video
Make video-related settings.
HDMI Setup
Make settings for HDMI Audio Out, HDMI Pass Through and HDMI
Control settings.
NOTE
0
When “HDMI Pass Through” and “HDMI Control” is set to “On”, it consumes more
standby power. (“HDMI Pass Through” ( v p. 184), “HDMI Control” ( v p. 186))
If you are not using this unit for an extended period, it is recommended that you
unplug the power cord from the power outlet.
o HDMI Audio Out
Selects the audio output speakers.
AVR
(Default):
Play back through speakers connected to
the unit.
TV:
Play back through TV connected to the
unit.
0 When the HDMI Control function is activated, priority is given to the TV audio
setting. ( v p. 142)
0
When the power of this unit is on and “HDMI Audio Out” is set to “TV”, audio is
output as 2-channel from the HDMI OUT connector.
o HDMI Pass Through
Selects how this unit will transmit HDMI signals to the HDMI output in
standby power mode.
On
(Default):
Transmits the selected HDMI input
through this unit’s HDMI output when this
unit is in standby power mode.
Off:
No HDMI signals are transmitted through
this unit’s HDMI output in standby power
mode.
Contents Connections Playback Settings Tips Appendix
184
Front panel Display Rear panel Remote Index