Setting the back light of the remote control unit, Disabling the backlight, This turns on the backlight for approx. 5 seconds – Marantz CINEMA 50 9.4-Channel Network A/V Receiver (Black) User Manual
Page 258: P. 258)
Advertising
Setting the back light of the remote control unit
SETUP
Light button
You can turn off the backlight of the remote control unit.
0
Backlight is set on in the factory settings.
Disabling the backlight
1
Press and hold both SETUP and Light button until the
MAIN and Z2 indicators on the remote are flashing
green, then release.
0
The backlight function can be turned on by performing step 1 again while the
backlight function is off.
258
Advertising