Marantz CINEMA 50 9.4-Channel Network A/V Receiver (Black) - Manual (Page 220)

o Subwoofer Mode
When you are using multiple subwoofers, set the audio to be output
from the subwoofer.
Standard
(Default):
All subwoofers output LFE signals and
bass below the crossover frequency of all
the speakers.
Directional:
All subwoofers output LFE signals. In
addition, each subwoofer outputs bass
below the crossover frequency of
speakers that are placed near them.
0
This can be set when “Subwoofer” is set to “4 spkrs”, “3 spkrs” or “2 spkrs”.
o Subwoofer Layout
When you are using multiple subwoofers, configure the subwoofer
layout. The layouts that can be selected differ depending on the
configuration of “Subwoofer Mode”.
[When “Subwoofer” is set to “2 spkrs”]
Left/Right
(Default):
Place subwoofers symmetrically on the
front side.
Front/Rear:
Place a subwoofer in the middle of the
front side and another in the middle of the
rear side.
[When “Subwoofer” is set to “3 spkrs”]
FL/FR/Rear:
Place subwoofers symmetrically on the
front side and one in the middle of the
rear side.
[When “Subwoofer” is set to “4 spkrs”]
FL/FR/RL/RR:
Place the subwoofers in the four corners
of the room.
Contents Connections Playback Settings Tips Appendix
220
Front panel Display Rear panel Remote Index