Marantz CINEMA 50 9.4-Channel Network A/V Receiver (Black) - Manual (Page 48)

Connecting 7.1-channel speakers
o Example layout when using surround back
speakers
This 7.1-channel surround system is basic 7.1-channel system.
(Adding surround back speakers to basic 5.1-channel system)
FL
SW C
SL
FR
SR
SBL SBR
For each speaker connection, refer to the following.
0
“Connecting speakers to the speaker terminals” ( v p. 42)
0
“Connecting an external power amplifier” ( v p. 43)
0
Set “Floor” to “5ch & SB” in the menu when connecting in this configuration.
( v p. 211)
o Example layout when using height speakers
This 7.1-channel surround system is the same as a basic 5.1-channel
system but with front height speakers.
FL
SW C
SL
FR
SR
FHL FHR
For each speaker connection, refer to the following.
0
“Connecting speakers to the speaker terminals” ( v p. 42)
0
“Connecting an external power amplifier” ( v p. 43)
0 Set “Floor” to “5ch” and “Height Sp” (or “Dolby Sp”) to “2ch” in the menu when
connecting in this configuration. ( v p. 211)
0 You can change the Front Height Speakers to any Height/Ceiling/Dolby Atmos
Enabled speakers in the “Amp Assign” - “Layout” setting. ( v p. 213)
Contents Connections Playback Settings Tips Appendix
48
Front panel Display Rear panel Remote Index