Oexample layout for auro-3d 11.1 channel system – Marantz CINEMA 50 9.4-Channel Network A/V Receiver (Black) User Manual
Page 53
o
Example layout for Auro-3D 11.1 channel
system
This speaker configuration is optimized for Auro-3D playback.
FL
FR
SW
SR
SL
C
FHL
FHR
CH
SHL
SHR
TS
0
Set “Floor” to “5ch” and “Height Sp” to “6ch” in the menu when connecting in this
configuration. (
Next, set “Height” - “Front Layout” to “Front Height & Center Height” and “Middle
Layout” to “Surround Height & Top Surround”. (
FHR FHL SHR SHL
C
SR
SL
CH
TS
SW
FR
FL
Power amplifier
z
1
z
1
z
2
z
2
z
3
z
3
z
1 The Top Surround and Center Height Speaker can be connected to the
Surround Back terminal instead of the Surround Back Speaker.
z
2 For the best Auro-3D experience Surround Height speakers are
recommended, however you may substitute Rear Height speakers from a
Dolby Atmos speaker setup in place of Surround Height speakers.
z
3 You can connect the external power amplifier to the Height 2 or Top
Surround / Center height channel instead of the Front channel. Use the “Pre-
out” setting in the menu to set the channel connected to the external power
amplifier. (
53