Marantz CINEMA 50 9.4-Channel Network A/V Receiver (Black) - Manual (Page 218)

o Pre-out
When “Assign Mode” is set to “11.1ch”, selects the PRE OUT
connector the external power amplifier used in MAIN ZONE.
The PRE OUT connectors that can be selected differ depending on the
combination of “Floor” and “Height” - “Layout” settings configured in
the menu. ( v p. 211)
This setting can be set when using 10 channels or more, including the
Floor Speaker, Height Speaker and Dolby Speaker.
FRONT
(Default):
The Front left and right preamplifier
outputs are connected to an external
amplifier.
HEIGHT 2 z :
The Height2 left and right preamplifier
outputs are connected to an external
amplifier.
SURROUND BACK z :
The Surround Back left and right
preamplifier outputs are connected to an
external amplifier.
z The name of the speaker is displayed that is set for the HEIGHT 2 or
SURROUND BACK speaker terminals by the “Height” - “Layout” setting in the
menu.
o View Terminal Config.
This shows how to connect the speaker terminals and PRE OUT
connectors for your “Amp Assign” setting on the menu screen.
Contents Connections Playback Settings Tips Appendix
218
Front panel Display Rear panel Remote Index