Marantz Stereo 70S 2.1-Channel Network A/V Receiver - Manual (Page 120)

5
Select “Source” as the input source for ZONE2.
If “Source” is selected as the input source of ZONE2, the input
source is changed to mirror that of the MAIN ZONE.
0
The factory default setting for the ZONE2 input source is
“Source”.
0
If you have changed the input source for ZONE2 to a different
setting, use the “Marantz AVR Remote” App to change it to
“Source”.
A
Tap zone control (
K
) to select ZONE2.
B
Select “Source” as the input source.
0 The ZONE2 input source cannot be set to “Source” from the main unit or remote
control unit.
0
The following audio signals can be played in ZONE2.
Input
Output
ZONE2
Digital Audio (HDMI) S
Digital Audio (Coaxial/Optical) S
Analog Audio S
USB S
HEOS Music S
TUNER S
Contents Connections Playback Settings Tips Appendix
120
Front panel Display Rear panel Remote Index