Marantz Stereo 70S 2.1-Channel Network A/V Receiver - Manual (Page 54)

Adjusting the volume
1
Use VOLUME
no
to adjust the volume.
0
The variable range differs according to the input signal and channel level setting.
0
You can also adjust the master volume by turning VOLUME on the main unit.
Turning off the sound temporarily
(Muting)
1
Press MUTE : .
0
MUTE indicator on the display flashes.
0 h
appears on the TV screen.
0
The sound is reduced to the level set at “Mute Level” in the menu. ( v p. 130)
0
To cancel mute, either adjust the sound volume or press MUTE : again.
0
If
h
is displayed on the TV screen for more than 5 minutes when the “Screen
Saver” is set to “On”, the
h
symbol moves randomly over the TV screen.
( v p. 137)
Playback a Blu-ray Disc player/DVD
player
The following describes the procedure for playing Blu-ray Disc player/DVD
player.
1
Prepare for playback.
A
Turn on the power of the TV, subwoofer and player.
B
Change the TV input to the input of this unit.
2
Press POWER X to turn on power to the unit.
3
Press Blu-ray to switch an input source for a player
used for playback.
4
Play the Blu-ray Disc player or DVD player.
0 This unit supports analog audio signals and PCM 2-channel signals. To play DVDs
and Blu-ray Discs, set “PCM 2ch” as the audio format in the audio device settings.
Contents Connections Playback Settings Tips Appendix
54
Front panel Display Rear panel Remote Index