Adjusting the tone (tone), P. 98) – Marantz Stereo 70S 2.1-Channel Network A/V Receiver User Manual
Page 98
Adjusting the tone (Tone)
Adjusts the tonal quality of the sound.
1
Press OPTION.
An option menu screen is displayed.
0
When the input source is “HEOS Music”, an option menu for
online music is displayed. Select “Receiver Options...”, then press
ENTER.
2
Use cursor Up/Down to select “Tone”, then press
ENTER.
The “Tone” screen is displayed.
3
Select the sound range to be adjusted.
Bass:
Adjust bass.
Treble:
Adjust treble.
4
Use cursor Left/Right to adjust the tone, then press
ENTER.
-6 dB – +6 dB (Default : 0 dB)
0
“Tone” settings are stored for each input source.
0
This cannot be set when the sound mode is set to “Direct” or “Pure Direct”.
0
You cannot set this when no audio signal is input or in the menu “HDMI Audio Out”
is set to “TV”. (
0
You can also adjust the tone by turning the BASS and TREBLE knobs on the main
unit.
98