Marantz Stereo 70S 2.1-Channel Network A/V Receiver - Manual (Page 194)

Resetting network settings
If network contents cannot be played or the unit cannot connect to the network, restarting the unit may improve the problem. We recommend restarting the
unit before returning the settings to the default settings. ( v p. 175)
If the operations are not improved by restarting the unit, follow the steps below.
Network settings are reset to the factory default values. Make settings again.
However, the menu “Audio”, “Video” and “Speakers” settings are not reset.
X
INPUT selector knob
1
When this unit is turned on, press and hold X on the
main unit until “SPECIAL MODE” appears on the
display.
2
Turn the INPUT selector knob to select “3Network
Reset”, then press X .
“Network Reset...” appears on the display.
3
“Complete” is shown in the display when reset is
complete.
0 Before returning the settings to the default settings, use the “Save & Load” function
from the menu to save and restore the details of various settings configured on the
unit. ( v p. 168)
0
You can also reset the network settings to the factory defaults using “Reset” -
“Network Settings” in the menu. ( v p. 169)
NOTE
0
Do not turn the power off until reset is complete.
Contents Connections Playback Settings Tips Appendix
194
Front panel Display Rear panel Remote Index