Marantz Stereo 70S 2.1-Channel Network A/V Receiver - Manual (Page 65)

Adjusting the volume of Bluetooth
headphones
If you are using Bluetooth headphones that do not have volume control, or
if the volume is insufficient, you can control the volume by adjusting the
“Level” of the “Bluetooth Transmitter” from the options menu.
1
Press OPTION.
An option menu screen is displayed.
0
When the input source is “HEOS Music”, an option menu for
online music is displayed. Select “Receiver Options...”, then press
ENTER.
2
Use cursor Up/Down to select “Bluetooth Transmitter”,
then press ENTER.
The “Bluetooth Transmitter” screen is displayed.
3
Use cursor Up/Down to select “Level”.
4
Use cursor Left/Right to adjust the volume, then press
ENTER.
–50 dB – +10 dB (Default: 0 dB)
0 This setting applies to all connected Bluetooth headphones, regardless of type.
Reconnecting to a Bluetooth
headphones
Follow any of the steps below to reconnect the most recently used
Bluetooth headphones:
0
Reconnect to this unit with Bluetooth headphone's reconnect function.
0
Go to “Bluetooth Transmitter” and then select “Reconnect” within the
options menu.
0
If “Output Mode” is set to “Bluetooth + Speakers”, this unit will
automatically connect to the most recently used Bluetooth headphones
when power is turned on.
0
Select the device you wish to connect from the “Device List” under
“Bluetooth Transmitter” in the menu. ( v p. 160)
Contents Connections Playback Settings Tips Appendix
65
Front panel Display Rear panel Remote Index