Marantz Stereo 70S 2.1-Channel Network A/V Receiver - Manual (Page 133)

o HDMI Control
You can link operations with devices connected to HDMI and
compatible with HDMI Control.
On: Use HDMI Control function.
Off
(Default):
Do not use HDMI Control function.
0
Please consult the operating instructions for each connected device to check
the settings.
0
When “HDMI Control” is set to “On”, the power to this unit can be linked to the
TV power and the volume of this unit can be controlled using the TV remote
control.
0 Refer to “HDMI Control function” for more information about the HDMI Control
function. ( v p. 104)
NOTE
0
If the “HDMI Control” settings have been changed, always reset the power to
connected devices after the change.
o ARC
On the TV connected to the HDMI OUT connector, set whether to
receive sound from the TV via HDMI.
On: Use ARC function.
Off
(Default):
Do not use ARC function.
0
If using this function, use a TV compatible with ARC (Audio Return Channel)
and enable the HDMI Control function of the TV.
0
When “ARC” is set to “On”, the volume of this unit can be controlled using the
TV remote control even when “HDMI Control” is set to “Off” on this unit.
NOTE
0 If the “ARC” settings have been changed, always reset the power to
connected devices after the change.
0
Only the PCM 2-channel setting can be used to play sound from a TV via the
ARC function. Set “PCM 2ch” as the audio format in the TV settings.
Contents Connections Playback Settings Tips Appendix
133
Front panel Display Rear panel Remote Index