Oinput mode, Oset defaults – Marantz Stereo 70S 2.1-Channel Network A/V Receiver User Manual
Page 142
o
INPUT MODE
Set the audio input modes for each input source.
It is normally recommended to set the audio input mode to “AUTO”.
AUTO
(Default):
Automatically detect input signal and
perform playback.
HDMI:
Play only signals from HDMI input.
DIGITAL:
Play only signals from digital audio input.
ANALOG:
Play only signals from analog audio input.
0
If “ARC” is set to “On” and a TV compatible with the ARC is connected via the
HDMI OUT connectors, the input mode whose input source is “TV Audio” is
fixed to ARC.
o
Set Defaults
The “Input Assign” settings are returned to the default settings.
0
This unit supports analog audio signals and PCM 2-channel signals. To connect
devices with the HDMI and DIGITAL connectors, set “PCM 2ch” as the audio
format in the audio device settings.
142