Mocomtech CDM-QX - Manual (Page 239)

CDM-Qx/QxL Multi-Channel Satellite Modem with DoubleTalk™ Carrier-in-Carrier® Revision 7
Appendix C MN/CDMQX.IOM
C–21
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Alarm Mask MSK= 12 bytes Command or Query.
Alarm mask condition, in form abcdefghijkl, where:
a=TX FIFO (0=Unmasked, 1=Masked, X=no Tx)
b=G.703 BPV (0=unmasked, 1=Masked, X=no Tx)
c=Tx-AIS (0=Unmasked, 1=Masked, X=no Tx)
d=RX AGC Alarm (0=Unmasked, 1=Masked, X=no Rx)
e=Eb/No Alarm (0=Unmasked, 1=Masked, X=no Rx)
f=RX-AIS (X=no Rx)
g=Buffer Slip (X=no Rx)
h=EXT REF Alarm
i=BUC Alarm
j=LNB Alarm
k=Spare
l=Spare
Example: MSK=010110010100
MSK=
MSK?
MSK*
MSK#
MSK^ MSK? MSK=abcdefghijkl
(see Description of
Arguments)
Online status
for Internal
Redundancy N/A 4 bytes Query only.
Sets Internal Redundancy online status in the form abcd, where:
a=1, Slot#1 is online, 0 otherwise
b=1, Slot#2 is online, 0 otherwise
c=1, Slot#3 is online, 0 otherwise
d=1, Slot#4 is online, 0 otherwise
In 1:1 modem, abcd=1100, modem #1 is online
abcd=0011, modem #2 is online
N/A ONL? ONL=abcd
(see Description of
Arguments)
Redundancy
Auto or
Manual
Switching RAM= 1 byte Command or Query.
Sets redundancy switch control in the form x, where:
0 = manual switching (default)
1 = automatic switching
RAM =
RAM?
RAM *
RAM #
RAM^ RAM? RAM=x
(see Description of
Arguments)
ReCenter
Buffer RCB= None Command only.
Note: This command takes no argument.
Forces the software to recenter the receive Plesiochronous/Doppler
buffer.
Example: RCB=
RCB=
RCB?
RCB*
RCB#
RCB$
RCB^
RCB@ N/A N/A