Mocomtech CDM-QX - Manual (Page 247)

CDM-Qx/QxL Multi-Channel Satellite Modem with DoubleTalk™ Carrier-in-Carrier® Revision 7
Appendix C MN/CDMQX.IOM
C–29
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Retrieve next
5 unread
stored Events N/A 80 bytes Query only.
Unit returns the oldest 5 Stored Events, which have not yet been
read over the remote control, in the form {CR}Sub-body{CR}Sub-
body{CR}Sub-body{CR}Sub-body{CR}Sub-body{CR}, where Sub-
body = ABCCddmmyyhhmmss, where:
A being the fault/clear indicator
F=Fault
C=Clear
I =Info
B being the fault type where:
1=Unit
2=RX Traffic on Slot#1
3=RX Traffic on Slot#2
4=RX Traffic on Slot#3
5=RX Traffic on Slot#4
6=TX Traffic on Slot#1
7=TX Traffic on Slot#2
8=TX Traffic on Slot#3
9=TX Traffic on Slot#4
A=ODU
B=Power ON/OFF, or log cleared
CC is Fault Code numbers, as in FLT? Or Infor Code, which is:
0=Power Off
1=Power On
2=Log Cleared
3=Global Config Change
4=Redundancy Config Change
If there are less than 5 events to be retrieved, the remaining
positions are padded with zeros.
If there are no new events, the response is RNE*.
N/A RNE? RNE=
{CR}ABCCddmmyyhhmms
s{CR}ABCCddmmyyhhmm
ss{CR}ABCCddmmyyhhm
mss{CR}ABCCddmmyyhh
mmss{CR}ABCCddmmyyh
hmmss
(see Description of
Arguments)
Retrieved
next 5 unread
Stored
Statistics
(Modem Only) N/A 130 bytes Query only.
Unit returns the oldest 5 Stored Statistics, which have not yet been
read over the remote control, in the form {CR}Sub-body{CR}Sub-
body{CR}Sub-body{CR}Sub-body{CR}Sub-body, where Sub-
body=AA.ABB.BC.CD.Dddmmyyhhmmss, where:
AA.A Minimum Eb/No during sample period
BB.B=Average Eb/No during sample period
C.C=Max. TX Power Level Increase during sample period
D.D=Average TX Power Level during sample period
ddmmyyhhmmss=date/time stamp
If there are no new events, the unit replies with RNS* If there are
less than 5 statistics to be retrieved, the remaining positions are
padded with zeros.
N/A RNS? RNS={CR}
AA.ABB.BC.CD.Dddmmyy
hhmmss{CR}
AA.ABB.BC.CD.Dddmmyy
hhmmss{CR}
AA.ABB.BC.CD.Dddmmyy
hhmmss{CR}
AA.ABB.BC.CD.Dddmmyy
hhmmss{CR}
AA.ABB.BC.CD.Dddmmyy
hhmmss
(see Description of
Arguments)