Mocomtech CDM-QX - Manual (Page 44)

CDM-Qx/QxL Multi-Channel Satellite Modem with DoubleTalk™ Carrier-in-Carrier® Revision 7
Introduction MN/CDMQx.IOM
1–20
1.5.7 Miscellaneous
Front panel • Tactile keypad: 6 keys (Up/Down, Left/Right, Enter/Clear)
• VFD – Vacuum Fluorescent Display (blue): 2 lines of 40 characters each
Loopbacks Internal IF loopback, RF loopback, digital loopback, and inward/outward
loopback
Fault relays Hardware fault, RX and TX Traffic Alarms
M&C Interface EIA-232 and EIA-485 (addressable multidrop, 2-wire or 4-wire), 10/100 BaseT
Ethernet
M&C Software SATMAC software for control of local and distant units
AC
Consumption
CDM-Qx
(70/140 MHz)
120 watts (maximum)
CDM-QxL
(L-band)
250 watts (maximum)
AC Operating Voltage 100 to 240 VAC, +6%/-10% - autosensing
(total absolute max. range is 90 to 254 VAC)
DC Operating Voltage 36 to 72 VDC, 6.25 amps
Temperature
Operating 0 to 50 o C (32 to 122 o F)
Storage -25 to 85 o C (-13 to 185 o F)
Dimensions 1.75” H x 19” W x 19” D
(44 mm H x 480 mm W x 480 mm D)
Weight < 20 lbs (7.0 kg) approx (depends on configuration)
1.5.8 Approvals
CE Mark EMC Safety
FCC FCC Part 15 Class B