Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 168)

146 Fabric OS Message Reference
53-1003140-01
AG-1045
5
AG-1045
Message
New port <nport> has same Port WWN as old port <fport> as part of duplicate Port
WWN detection policy.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates that the specified new port has the same Port World Wide Name (PWWN) as the old port.
Recommended
Action
No action is required.
AG-1046
Message
D_Port test will not start due to error in removing mapping for the F_Port <port>.
Retry after sometime.
Message Type
AUDIT | LOG
Class
CFG
Severity
INFO
Probable Cause
Indicates that there is an error in removing mapping for the specified port and due this there was a failure
in starting the D_Port test.
Recommended
Action
Retry the D_Port test after sometime.
AG-1047
Message
Error in restoring one or all the mappings for the F_Port <port>. Add the mappings
manually. Configured <Cofigured N-port>, Static <Static N-port> and Preffered
<Preferred N-port>.
Message Type
AUDIT | LOG
Class
CFG
Severity
INFO
Probable Cause
Indicates that there is an error in restoring the mapping for the specified port.
Recommended
Action
Add the mappings to the port manually.