Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 467)

Fabric OS Message Reference 445
53-1003140-01
FICN-1103
5
FICN-1103
Message
DevTeraIngr:Exceptional Status rcvd on Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> state=0x<current emulation
state> status=0x<the exceptional status value>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates that the status (0x0D or 0x05) indicating the device is going down was received from the device
or error status (including Unit Check 0x02) is received from an active emulation device.
Recommended
Action
The device doing down is a normal event during pipelining and not the unit check. If there are associated
I/O error messages with this event, contact your vendor's customer support for assistance.
FICN-1104
Message
DevTeraEgr:Device Ready on Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr>.
Message Type
LOG
Severity
INFO
Probable Cause
Indicates the Teradata device has been initialized and is ready for emulation operations.
Recommended
Action
No action is required.
FICN-1105
Message
DevTeraIng:LRJ received on Path=0x<VEPortNumber HostDomain HostPort
DeviceDomain><DevicePort LPAR CUADDR DeviceAddr> lastCmds=0x<Last 4 commands
received from the channel for this device> lastStatus=0x<Last 4 status values
presented to the channel for this device> treating as system reset event.
Message Type
LOG
Severity
WARNING
Probable Cause
Indicates a Link Level Reject (LRJ) from a FICON channel indicates that the channel does not have a
path established to the Control Unit.
Recommended
Action
This is normally an unexpected event; contact your vendor's customer support for assistance.