Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 493)

Fabric OS Message Reference 471
53-1003140-01
FSS-1007
5
FSS-1007
Message
<component name>: Faulty Ethernet connection.
Message Type
LOG
Severity
CRITICAL
Probable Cause
Indicates that the Ethernet connection between the active control processor (CP) and the standby CP is
not healthy. This error occurs when the standby CP does not respond to a request from the active CP
within five seconds. This usually indicates a problem with the internal Ethernet connection and the
disruption of the synchronization process.
Recommended
Action
Execute the supportShow or supportSave command to validate the network configuration and then
execute the haSyncStart command to restore the high availability (HA) synchronization. If the problem
persists, contact your switch service provider.
FSS-1008
Message
FSS Error: <Error Message>.
Message Type
LOG
Severity
CRITICAL
Probable Cause
Indicates that a Fabric OS state synchronization (FSS) error has occurred.
Recommended
Action
Execute the supportSave command and contact your switch service provider.
FSS-1009
Message
FSS Error: <Error Message>.
Message Type
LOG | FFDC
Severity
ERROR
Probable Cause
Indicates that a Fabric OS state synchronization (FSS) error has occurred for the specified component.
The error code is displayed in the message.
Recommended
Action
Execute the supportSave command and contact your switch service provider.