Brocade Fabric OS Message Reference (Supporting Fabric OS v7.3.0) - Manual (Page 838)

816 Fabric OS Message Reference
53-1003140-01
SEC-3001
5
SEC-3001
Message
Event: <Event Name>, Status: success, Info: Security mode <State change: Enabled
or Disabled> on the fabric.
Message Type
AUDIT
Class
SECURITY
Severity
INFO
Probable Cause
Indicates the security mode of the fabric was either enabled or disabled.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
SEC-3002
Message
Event: <Event Name>, Status: success, Info: <Event Related Info>.
Message Type
AUDIT
Class
SECURITY
Severity
INFO
Probable Cause
Indicates the specified security event has occurred. The event can be one of the following:
• There has been a fabric configuration server (FCS) failover.
• A security policy has been activated.
• A security policy has been saved.
• A security policy has been aborted.
• A non-FCS password has changed.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security policy.
SEC-3003
Message
Event: <Event Name>, Status: success, Info: Created <Policy Name> policy, with
member(s) <Member List> .
Message Type
AUDIT
Class
SECURITY
Severity
INFO
Probable Cause
Indicates a new security policy with entries has been created. When you use a wildcard (for example, an
asterisk) in creating a policy, the audit report displays the wildcard in the event information field.