Configuring vaisala device with fusionlive – Innotech IG04 BACnet Gateway User Manual
Page 15
Installation Instructions for Innotech IG04 BACnet Gateway and Vaisala Transmitter / Sensor
Page 15
© Mass Electronics Pty Ltd 2011
Edition 5.0 dated 11/11/2013
Configuring Vaisala Device with FusionLIVE
When you have accessed the FusionLIVE Java application as described in the
section, you can modify the configuration settings of the Vaisala device by
clicking on the
button from the FusionLIVE window. The Configure Vaisala Device
Settings
window will be displayed, as illustrated in Figure 11 below.
Figure 11: Vaisala device configuration settings window
Callout
Vaisala device
parameter
Description
1
Baud Rate
The baud rate at which the Vaisala device will communicate
with the IG04 BACnet Gateway. If the baud rate of the Vaisala
device is changed, the IG04 baud rate will be updated
automatically to match the baud rate of the Vaisala device.
2
Precipitation Reset This is the time of the day when the rain and hail counters will
reset to zero. The default setting is 12:00AM.
Table 5:
Vaisala device parameter description
For an explanation of all other Vaisala device settings, refer to the appropriate Vaisala technical
documentation at
Disabling the Rain, Wind, or Hail settings on the Vaisala device will disable the BACnet objects for those objects on the
IG04 BACnet Gateway.
NOTE
1
2