Clock tab – Innotech IG04 BACnet Gateway User Manual
Page 18
Advertising
Installation Instructions for Innotech IG04 BACnet Gateway and Vaisala Transmitter / Sensor
Page 18
© Mass Electronics Pty Ltd 2011
Edition 5.0 dated 11/11/2013
Clock Tab
Under the Clock tab you can configure or modify the following settings:
• Current date and time – used for the Precipitation Reset setting
• Daylight Savings time
• Location – used to create Sunrise / Sunset data on the home page, along with day / night
indication
In order to adjust the Daylight Savings time, you must first enable it by turning the Operation to
ON.
You can then adjust the Start and Stop dates for Daylight Savings time. Click on
Apply to save your
changes, as illustrated in Figure 14 below.
Figure 14: Configure IG04 settings in FusionLIVE – Clock Tab
Advertising