ADC AVIDIA SWD4573I1 - Manual (Page 216)

Configuring SPVCs
190 Avidia System Configuration and Management User Manual
Example
::spvc=> new 4.3 100 100 39:26:34:34:75:85:11:08 -txtraf 3
-rxtraf 4 -interval 100 -retrynumber 50 -admin up
Changing SPVC Admin Status
From the appropriate ::spvc=> prompt, type the admin command in the following format,
then press .
admin <slot.port> <vpi> <vci> <(up|down)>
Parameters
<slot.port>
The SPVC channel card slot and port (format slot.port).
<vpi>
The VPI of the VCC between the CPE and the line card.
<vci>
The VCI of the VCC between the CPE and the line card.
<(up|down)>
Type up to activate the SPVC, or type down to deactivate it.
Example
::spvc=>admin 4.3 100 100 up
ENTER