Configuring system trap generation status, Configuring boot file information, Onfiguring – ADC AVIDIA SWD4573I1 User Manual
Page 408: Ystem, Eneration, Tatus, Nformation
Configuring System Trap Generation Status
382
Avidia System Configuration and Management User Manual
C
ONFIGURING
S
YSTEM
T
RAP
G
ENERATION
S
TATUS
Traps are messages sent from the management card regarding system events, such as alarms.
The Avidia system distinguishes between two types of traps. Agent authentication traps are
generated when the system receives an invalid SNMP community string. (See
for more information on community strings.) General traps are
generated in response to system events such as alarms and configuration changes. You must
specify whether or not you want the system to generate each type of trap.
1
In the
System Settings
window
Agent Trap
box, select
enable
or
disable
to enable or disable
all trap generation other than the agent authentication trap.
2
In the
Agent Authentication Trap
box, select
enable
or
disable
to enable or disable agent
authentication error trap generation.
3
Do one of the following:
•
To activate the new settings, click
Set
.
•
To cancel the new settings, click
Get
. You can only cancel the new settings if you have
not yet clicked
Set
.
C
ONFIGURING
B
OOT
F
ILE
I
NFORMATION
You must specify the location from which to boot the management card image file. For an
explanation of Avidia image files, see
“Avidia System File Management” on page 8
1
In the
System Settings
window
Boot Mode
box, do one of the following:
•
Click
nvram
to set the boot location to management card NVRAM.
•
Click
network
to set the boot location to an external TFTP server using TFTP protocol.