Kinze 3110 Mounted Planter Rev. 7/14 - Manual (Page 105)

TM
Model 3110 M0244-01
9/12 6-5
Lubrication and Maintenance
GREASE FITTINGS
Those parts equipped with grease fittings should be lubricated at the frequency indicated with an SAE multipurpose
grease. Be sure to clean the fitting thoroughly before using grease gun. The frequency of lubrication recommended is
based on normal operating conditions. Severe or unusual conditions may require more frequent attention.
NOTE: Numbers on illustration below correspond to photos on following pages showing lubrication frequencies.
Model 3110 6 Row 30" Shown
2. Low Profile Row Markers - 2 Zerks Per Assembly
1. Conventional Row Markers - 4 Zerks Per Assembly
3. Wheel Module Shaft - 2 Zerks Per Module