Great Plains Flex Harrow Light Kit - Manual

12/15/2011 564-092M
Great Plains Manufacturing, Inc. 1
Flex Harrow Light Kit
Installation Instructions
General Information
These Instructions explain how to install the flex harrow
light update kit. The lights will be shipped mounted to
brackets.
MetaData: of <Safety Topics>Introduction
Tools Required
• Basic Hand Tools
• Drill & Drill Bits
• Welder (optional)
Models Covered
Note: Refer to Parts manual (564-070P) for machine parts
breakdown. The brackets may be welded on instead
of drilling holes and bolted on. Use drill placement
drawings if welding on. Align holes in brackets to di-
mensions in drawings. Remove old wiring harness
and light brackets.
Bottom Hole Placement
Refer to Figure 1
1.
Drill four 7/32 holes in location shown on both sides.
Flex Harrow 6000
564-091A FLEX HARROW LIGHT KIT
Null4:
Null4:
Part # Description Qty.
564-088H LIGHT BRACKET 2
564-090H LIGHT BRACKET 2
801-081C SCREW HEX SELF TAP 1/4-20X3/4 8
564-092M
FLEX HARROW LIGHT UPDATE
KIT
1
802-005C HHCS 1/4-20X1 GR5 12
802-091C HHCS 1/2-13X1 1/2 GR5 4
803-007C NUT-LOCK 1/4-20 PLT 12
803-020C NUT HEX 1/2-13 PLT 4
804-015C WASHER LOCK SPRING 1/2 PLT 4
838-603C DECAL REFLECTOR ORANGE 2X9 2
838-614C DECAL REFLECTOR RED 2X9 2
838-615C DECAL REFLECTOR AMBER 2X9 4
890-901C SAFETY LIGHT KIT 1
Null4:
Figure 1
Bottom Hole Placement 42305