Great Plains Raven G1 Autoboom Assy User Manual
General information, Assembly instructions, Before you start
© Copyright 2006 Printed
Great Plains Mfg., Inc.
Used with:
Installation Instructions
500-645M
Front Fold Boom Sprayers
Raven G1 Autoboom Assy 2006-
• Front Fold Boom Sprayers
General Information
When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception. Your life
and the lives of others depend on it!
!!
These instructions explain how to install the Raven G1
Autoboom Hydraulic Kit. This kit is used to install the
hydraulics for the autoboom.These instructions apply
to:
510-038A
Raven G1 Autoboom Assy 2006-
8/2/2006
Before You Start
Page 2 is a detailed listing of parts included in the
Raven G1 Autoboom Assy 2006-. Use this list to in-
ventory parts received.
Tools Required
• Basic Hand Tools
Assembly Instructions
25033
Refer to Figure 1
1.
Unfold boom, lower elevator, and place supports
at boom ends.
2.
Remove tilt cylinders (1) from center section and
inner boom. Keep all hydraulic fittings, elbows (2),
and breather plugs (3) from each cylinder for re-
use.
3.
Install 11" stroke cylinders supplied in kit. Rein-
stall previously removed breather plugs in base
end of cylinders.
Figure 1