Great Plains 2515P Marker Option - Manual

© Copyright 2000 Printed
Great Plains Mfg., Inc.
Used with:
Installation Instructions
113-685M
1515, 2015, 2515, 2015P and 2515P
Marker Option
General Information
Assembly Instructions
When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception. Your life and
the lives of others depend on it!
!!
These instructions explain how to install the Mark-
er Option for 3-point soybean machines. The
markers fold and unfold hydraulically for field op-
eration. The marker disks leave a line for the bean
machine operator to follow on the next field pass.
Markers are mounted on the bean machine frame
and require two hydraulic remote valves on the
tractor. A sequence valve is available so markers
can be operated on one hydraulic circuit.
These instructions apply to:
113-666A 15 Ft. Bean Machine Dual Marker
113-682A 20 Ft. Bean Machine Dual Marker
113-663A 25 Ft. Bean Machine Dual Marker
113-466A 3-Pt Sequence Valve Kit-Field
113-686A 15 Ft. BM Marker Bolt Plate Kit
Marker Assembly, 1515, 2015 and
2015P
Refer to Figure 1.
1. Lower bean machine into field position. Allow
9 feet on each end of a 15-foot bean machine
and 11 feet on each end of a 20-foot bean ma-
chine for marker assembly.
2. Mount first marker section (1) on bean ma-
chine 7 x 5 inch frame tube (2). Mount marker
as far out on the frame as possible. Secure
marker with 3/4 inch u-bolts (3), lock washers
and nuts (4).
Figure 1
First Marker Section Assembly
17727
3/19/2003
• 1515 Soybean Machine
• 2015 Soybean Machine
• 2515 Soybean Machine
• 2015P Bean Machine
• 2515P Bean Machine
Manual Update
Refer to the soybean machine operator’s manual
for detailed information on safely operating, ad-
justing, troubleshooting and maintaining the
Marker Option. Refer to the parts manual for part
identification.
Manual Numbers
173-159M 1515, 2015 and 2515 Operator’s
Manual
173-159P 1515, 2015 and 2515 Parts
Manual
173-208M 2015P and 2515P Operator’s
Manual
173-208P 2015P and 2515P Parts Manual
Before You Start
Pages 9 and 10 are a detailed listing of parts in-
cluded in the Marker Option package. Use this list
to inventory parts received.
Rev. A