Great Plains Native Grass Cup Enhancement Kit - Manual

Great Plains Mfg., Inc.
Installation Instructions 1
©Copyright 2006 Printed 10/24/2006 202-598M
Native Grass Cup Enhancement Kit
Native Grass Drills
Used with:
• Pre-2007 605NT, 3P605NT Native Grass
• Pre-2007 705, 706, 1005, 1006 Native Grass
• Pre-2007 3PNG12, 3PNG15, 2SNG24, 2SNG30, NG12 Grass Seeder
General Information
These instructions explain how to install the Native Grass
Cup Enhancement Kit. This kit enhances your Great
Plains Native Grass Drill to a hi-rate native grass seed
sprocket. This kit fits most Great Plains Native Grass
Drills. If your drill is not listed above, have your dealer
contact the factory, as a kit may be available.
If your drill is a Series II, you already have this enhance-
ment.
These instructions apply to:
For a complete Series II enhancement, separately order
one of the agitator kits below, and two decals:
If installing a complete upgrade to Series II, install this kit
(the cup enhancement) before installing the agitators.
Before You Start
Each kit converts one row. You need a kit for each row of
your machine. Count rows and kits.
For each kit, inventory the contents per the “Parts List” on
page 3.
Determine whether your machine is an older model with-
out a removable tray at the bottom of the seed box. The
instructions vary depending on machine type.
If necessary, move the drill to a dry well-lighted location
suitable for disassembly.
Park and secure the drill. Secure the tractor if left con-
nected.
Disconnect any hydraulic and electrical power to the drill.
Have the following tools at hand:
• Parts Manual, or Operator/Part Manual for your drill.
if you do not have one, a copy can be obtained from
your dealer, or, in most cases, on-line in the Support
section of the Great Plains web site:
www.greatplainsmfg.com
•
3 ⁄
16 in hex driver with a reach of at least 6in through a
1
3 ⁄
4 in access hole (the hose port of the cup)
• Basic hand tools
202-597A Native Grass Cup Enhancement Kit
(order one kit per row)
202-600A 6’ NG SERIES II AGITATOR KIT
202-601A 706-7 1/2” NG SERIES II AGT.
202-602A 1006-7 1/2” NG SERIES II AGT.
202-603A NG-12 SERIES II AGITATOR
202-604A 12’ 7 1/2” NG SERIES II AGT.
202-605A 12’ 10” NG SERIES II AGT.
202-606A 15’ 7 1/2” NG SERIES II AGT.
202-607A 15’ 10” NG SERIES II AGT.
838-986C DECAL NATIVE GRASS SERIES II