Great Plains Yield-Pro 1625 Planter 2004 - Manual

Great Plains Mfg., Inc.
© Copyright 2005 Printed
Used with:
Update Instructions
402-188M
2004 Yield-Pro® 1625 Planter
Base Update 2005 Kit
• 2004 Yield-Pro® 1625 Planter
General Information
These instructions explain how to install the 2004 Yield-
Pro® 1625 Planter Base Update 2005 Kit. Field Update
Kits are designed to improve the performance and reliabil-
ity of the planter.This update includes Yield-Pro® support
stands, new heavy duty gauge wheel casters, replace-
ment idlers, and airbox modifications.
These instructions apply to:
402-187A 2004 Yield-Pro® 1625 Planter Base
Update 2005 Kit
402-180A Yield-Pro® 1625 Fertilizer Update Kit
2005
Before You Start
Starting on page 11 is a detailed listing of parts included in
the 2004 Yield-Pro® 1625 Planter Base Update 2005 Kit.
Use this list to inventory parts received.
Tools Required
• Basic Hand Tools
• Snap Ring Pliers
• Caulk Gun
• 2-ton Support Stand and Blocks
• Dial Type Inch-lb Torque Wrench
• Forklift
Assembly Instructions for 402-187A
Install Yield-Pro® Support Stand
Refer to Figure 1
1. Attach park stand mount (3) to underside
of hitch crossbar weldment (1) on each
end of crossbar. Secure mount (3) to
crossbar (1) using 1/2-13 x 6 1/32 x 7 1/4
u-bolt (2), 1/2 lock washer (4), and 1/2-13
hex nut (5).
2. When in use, secure stand (7) to mount
(3) by inserting two 3/8 x 2 1/2 wire snap
lock pins (6) in the two outermost holes (8
and 9) on mount (3).
3. When stand (7) is not in use, remove bot-
tom pin (6) from lower hole (9). Swing
stand underneath crossbar (1) and se-
cure by inserting pin (6) below stand in in-
nermost hole (10) on mount (3).
When you see this symbol, the subsequent instructions and
warnings are serious - follow without exception. Your life and
the lives of others depend on it!
!!
12/12/2005
23402
Figure 1
Support Stand