AMETEK BPS Series Programming Manual - Manual (Page 196)

AMETEK Programmable Power BPS / MX / RS Series SCPI Programming Manual
196 Manual P/N 7003-961 Rev AA
DO160:STANdard
This command will select the proper standard. The standard selection must be verified prior
to any test selection. Airbus standard is the same as the Eurocae standard with the
exception of nominal voltage modulation.
Command Syntax DO160:STANdard
Parameters <RTCA|EURocae|AIRBus>
Examples DO160:STAN
RTCA
Query Syntax DO160:STAN?
DO160:GROup
This command is used to select equipment Group 1, 2 or 3. It is only valid with the
EUROCAE standard.
Command Syntax DO160:GROup <NR1>
Parameters 1 through 3
Examples DO160:GROup 2
Query Syntax DO160:GRO?