Baby Lock Palette 10 (ECS10) Instruction Manual - Manual (Page 297)

296
S
upple
me
n
t
For Basic Operations
• For best sewing results, set [Under sewing] to
[On] when sewing wide regions.
cc For more details, refer to "Under sewing"
on page 331.
• Changing the [Sewing Direction] setting
prevents pulling-in or puckering of the stitching.
• When embroidering, use stabilizer material
specifically for embroidering. Always use
stabilizer material when embroidering lightweight
or stretch fabrics, otherwise the needle may bend
or break, the stitching may pull and pucker, or the
pattern may become misaligned.
• When satin stitching is sewn in a wide area, the
stitched area may shrink after sewing, depending
on the material and the type of thread used. If this
happens, switch to this alternate method: Select
the fill stitch and use stabilizer material on the
reverse side of the fabric.
Sewing Wide Areas
Pattern
After sewing