Baby Lock Palette 10 (ECS10) Instruction Manual - Manual (Page 330)

329
Sewing Attributes
Chain Stitch
Cutting
Stitch Type
Triangular Diamond-shaped
Size
Smaller Larger
Time
1 time 6 time
Arrange
Start/End Type
Feed Run
cc "If the entry/exit points of sewing have been changed" on page 330
Connection
Points
This sewing attribute is available only when a text pattern is selected.
cc
"Selecting connection point positions in a text pattern" on page 116
Leave uncut
sections
Specify whether or not sections of the cutting
line are to be left uncut.
This prevents the fabric from moving out of
place during cutting.
If it is set to [On], cut them with scissors after
the cutting step is finished.
Off On
Use
For more cleanly cut edges, for example, on
patches, select [Cutting only]. If the cut edge
will be embroidered, for example, on appliqués,
select [Cutting for covering edge of fabric].
Cutting only Cutting for covering
edge of fabric